|
|
Fire Station Type C2
Wojcik, Jindřich ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of the fire station of type C2 for the HZS. The building is divided into two parts. First part of a building is designed as a rectangular recessed floor. The first part of building consists of two floors and one underground floor. Roofed by a single-layer flat roof of soft PVC. The building will be used to perform the services, the fire brigade. It will be used 24 hours a day. In the basement is located warehouse, HVAC room, utility room and a lounge with an alternative source of electricity. On the first floor are designed garages for storage technique and also the dressing room, workroom, washing box, warehouse, room for chemical-technical service and concierge. The second floor is designed to serve firefighters. The second part of the building is a training tower, which will be used to train firefighters and for drying hoses. The training tower is designed as a simple steel structure with four floors. The project was developed in the educational version of ArchiCAD 16th project is designed in accordance with the requirements of a layout, architectural design, structural design proper and safe use of the building.
|
|
|
Fire station
Kaňa, Josef ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The diploma thesis named Fire Station deals with project documentation at the level of construction execution documentation for a fire station. The building is located on the outskirts of Holešov in the part called Všetuly. The building is located in close proximity to the existing production plants, the local industrial zone, which is accessible from outside the city and close to the approach to the under-construction D49 and part of the city bypass. The project deals with the location of the building on the land, including paved areas and their connection to existing roads, the project also includes the location of sports fields for physical training. The building is designed as a two-story building with five parking spaces for emergency vehicles, where this space extends over both floors. On the 1st floor, the technical facilities of the station with storage and a dirty changing room are designed. On the 2nd floor, emergency rooms and offices of serving firefighters with hygienic facilities are designed. The station is designed according to the Fire Protection Act size P2 for a JPO I category unit with 24 serving firefighters in three shifts. As part of the proposal, vehicles at the existing unit were considered AZ – 30 M1Z Novus, CAS 3 – T815, CAS 20 – S2Z MB, KHA, TA – MAN, Škoda Kamiq.
|
|
|
Fire house Brno
Lakota, Radek ; Čtvrtníčková, Kateřina (referee) ; Kolář, Radim (advisor)
The object of the project is to design a new building of fire station. The building is consisted of two sub-sections - administrative building storey flat roofed with shed roof and one-story building flat roofed garage with roof vegetation. The house is without the basement. The structural system is a brick-constuction with a heat insulation.
|
|
|
Building modifications, extension and superstructure of the fire station in Dobruška
Pacholíková, Petra ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The diploma thesis deals with building modifications, extension and superstructure in the existing free-standing fire station in Dobruška. It is a two-story administrative building with a partial basement and a used attic. Adjacent to the building are garages for maintenance and parking of exit equipment. In the basement there are warehouses and a technical room. A new layout is proposed on the first floor. There were spaces for a server room, the station commander's office, a meeting room, warehouses and new sanitary facilities. As the previous layout lacked some of the rooms needed for the work of employees, a chemical workshop, a warehouse for fire extinguishers and sorbents, filling of pressure cylinders and a wet operation are proposed here. An entrance to the newly designed extension is proposed from the garage, where there are dirty showers, a laundry room, dirty changing rooms, a PHM warehouse and a diesel generator. On the second above-ground floor, a training room, hygienic facilities, clean changing rooms and a kitchen with a dining room are designed from the existing layout. On this floor, a superstructure is designed above the existing garages, where there are facilities for employees - a living room, offices, bedrooms with sanitary facilities. The extension is based on foundation passes in the unfrozen depth and lost formwork. The vertical supporting structures of the extension are made of ceramic blocks and insulated with the ETICS contact insulation system. The entire extension is separated from the existing structures. The vertical supporting structures of the superstructure are designed from ceramic blocks with mineral insulation. The horizontal structures are designed from a ceramic mounted ceiling. A ventilated facade with aluminum cassettes is designed on the superstructure. The extension and superstructure are covered with a flat roof.
|
|
|
Firehouse
Hladký, Adam ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This diploma thesis „Firehouse“ is processed in the form of design documentation for building construction. It´s a new building of firehouse, JPO IV category, P type, for firefighters of Správa železniční dopravní cesty. Object is composed from three parts - administrative and operational part, garage for fire vehicles and maintenance part. Main entrance and exits from the garages are situated on west. Administrative and operational part has two floors and it´s roofed by double-shell roofs. The garage and maintenance have one floor and they are roofed by single-shell roof. Structural system is partly masonry and partly reinforced concrete. Object is located in flat terrain in peripheral locality of the Přerov city.
|
|
|
Fire station
Wrana, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of this thesis is to create a project documentation of the design of new construction of fire station in Šumperk. The fire station is designed according to ČSN 73 5710 as a C type station that will be used by professional fire brigade of Olomouc district. The object is structurally divided into two parts - a masonry building, and a reinforced concrete frame. The administrative part of the building together with the base of the fire brigade, technical room, and a fire tower are designed as a masonry building made of Ytong cellular concrete units. One of the parts is designed as a two-level object, while the technical room and the fire tower are designed as a sigle-level object. The circumferential masonry is insulated by contact thermal insulation system. The floor construction is made of Spiroll prestressed floor slabs. The roof is designed as a warm flat roof. The garage is a single-level building with built-in structure of storerooms in part of the garage. The precast reinforced concrete frame is set on foundation pads and foundation sills. The horizontal and vertical supporting structure consists of reinforced concrete parts – columns, Spiroll floor slabs, floor girders, sway frames, purlins and small purlins. The whole object is covered by a warm flat roof. The external cladding consists of PUR isolating sanwich panels.
|
|
|
Návrh hasičské stanice Brno-Chrlice
Mikoláš, Petr
The thesis is focused on the preparation of project documentation for the building permit for the new fire station of category P3 - AZ. The load-bearing structure of the building is proposed by a combination of a two-storey modern skeleton system (containing monolithic columns, floor system beams and CLT panels) and a three-storey timber frame constructions. The stairway areas and shaft spaces for HVAC and sanitary instalation cables are designed as a reinforced concrete core. The interior space distribution in the garage spaces, including the constructions for the fireman's poles, are solved with a load-bearing construction made of aerated concrete blocks. The structural compositions were designed based on the increased fire safety requirements and material characteristics of the selected materials. The inner disposition of the building is designed for an unmanned station without an information centre. The first floor is intended mainly as a garage space with technical background of the station. The second floor is intended partly as a technical floor with a classroom and further as a background for a command staff. The last floor serves as a living and service floor for the threeshift working schedule of the station serving 11 workers per 24-hour shift. The project documentation is carried out in accordance with current versions of technical standards, laws, decrees and regulations currently valid in the Czech Republic.In the theoretical-methodologic part, it is possible to find a research of available literature and professional reference sources dealing with topics directly related to the design and its structural parts. On the student's initiative, the possible completion of the building project (e.g. solution of fire safety of the building etc.) in the following up master's programme at Mendel University is also considered by the student.
|
|
|
Fire station, Salaš
Hráček, Tomáš ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The diploma thesis deals with the construction and layout solution of the new building of the fire station for volunteer firefighters in the village of Šalaš. The plot for the location of the building is located in the central part of the village of Salaš, cadastral territory of Salaš near Velehrad. The proposed building will be built from piece material, ceramic brick blocks. The roof is made as a slanted, purlin roof with over-rafter thermal insulation and a flat single-skin over part of the garage. Ceilings designed as reinforced concrete monolithic. Foundation on plain concrete footings. Constructions from the outside are equipped with facade thermal insulation boards from EPS, in the underground part XPS. The surface layer of the facade is made of thin-layer silicone plaster in light gray, anthracite and red colors with a scratched texture, the plinth is provided with mosaic plaster with colored pebbles in an anthracite color design. Window opening fillers with triple insulating glass in a plastic frame shade of anthracite gray on the outside, white color on the inside. Aluminum entrance door with triple insulating glass in anthracite color. The proposed construction is in accordance with the approved spatial plan and spatial development regulations of the city of Salaš. The access road is oriented from the south side of the property. The shape of the building does not disturb the surrounding buildings. Spatial regulations, requirements for building height, roof design and material solutions according to the current version of the Salaš spatial plan will be met. The building is designed as a two-story building, without a basement. It is a simple mass, L-shaped in plan. The design is based on the functional use and filling of the object. The main goal of this fire station proposal is to create a decent background for the local unit of volunteer firefighters. The building has all the necessary facilities for the members of the unit, namely a clean and unclean dressing room, hygienic facilities, social facilities, an office, social and meeting room, facilities for the maintenance of fire equipment and fire equipment, storage areas, a garage for two fire engines. Movement between individual floors is ensured by a double-arm staircase or an elevator. The social hall is designed for 54 guests. The material solution of the armory itself is structured into two prismatic blocks of different heights: a one-story block of the indoor garage with a tower for drying hoses, and a two-story building block.
|
|
|
Integrated rescue system building in Horice
Hejnová, Kateřina ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
The subject of the thesis is the development of project documentation at the construction stage. This is a new construction of a two-story fire station with an adjacent sports field, a training fire tower, an inner courtyard, a parking area, all connections, paved areas, new fencing and modification of the connection to the existing road. The building is for fireman in Horice and it is in the category of fire station P1.
|
|
|
Fire Station Type C2
Wojcik, Jindřich ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of the fire station of type C2 for the HZS. The building is divided into two parts. First part of a building is designed as a rectangular recessed floor. The first part of building consists of two floors and one underground floor. Roofed by a single-layer flat roof of soft PVC. The building will be used to perform the services, the fire brigade. It will be used 24 hours a day. In the basement is located warehouse, HVAC room, utility room and a lounge with an alternative source of electricity. On the first floor are designed garages for storage technique and also the dressing room, workroom, washing box, warehouse, room for chemical-technical service and concierge. The second floor is designed to serve firefighters. The second part of the building is a training tower, which will be used to train firefighters and for drying hoses. The training tower is designed as a simple steel structure with four floors. The project was developed in the educational version of ArchiCAD 16th project is designed in accordance with the requirements of a layout, architectural design, structural design proper and safe use of the building.
|
guest ::
